Wood pellets are a type of wood fuel, generally made from compacted sawdust. They are usually produced as a byproduct of sawmilling and other wood transformation activities. The pellets are extremely dense and can be produced with a low humidity content (below 10%) Full Version that them to be burned with a very high combustion efficiency. Further, their regular geometry and small size allow automatic feeding with very fine calibration. They can be fed to a burner by auger feeding or by pneumatic conveying.Boston Wood Pellets delivered to you, are the fuel used most pellet stove users choose. All wood pellets are biomass materials, that is, products of commonly grown plants and trees. The most common residential pellets are made from sawdust and ground wood chips, which are waste materials from trees used to make furniture, lumber, and other products. Resins and binders (lignin) occurring naturally in the sawdust hold wood pellets together, so they usually contain no additives. Nut hulls and other materials are pelletized in some areas, and unprocessed shelled corn (see corn pellets) and fruit pits can be burned in some pellet stove designs (see corn pellet stoves).
Your fuel of choice and its price may depend on the waste biomass most available to pellet mills in your region. In turn, your choice of appliance design depends on the fuel available.

Source
In the US, pellet mills across the country receive, sort, grind, dry, compress, and bag wood and other biomass waste products into a conveniently handled fuel. Today, over sixty pellet mills across North America produce in excess of 610,000 tons of fuel per year, a figure that has more than doubled in the last five years. Pellets are available for purchase at stove dealers, nurseries, building supply stores, feed and garden supply stores, and some discount merchandisers. Pellets are usually packaged in forty pound bags and sold by the bag or by the ton (fifty bags on a shipping pallet). Some mills offer twenty pound bags for easier handling.

Common characteristics
Although the chemical constituents and moisture content of different biomass materials vary, the Pellet Fuel Institute has identified common characteristics and developed fuel standards. These voluntary industry standards assure as much uniformity in the final product as is possible for naturally grown materials that become processed, but not refined fuel. PFI graded fuel must meet tests for:Density: consistent hardness and energy content (minimum 40 pounds/cubic foot)
Dimensions: length (1½” maximum) and diameter (1/4″or 5/16″) to assure” predictable fuel amounts and to prevent fuel jamming
Fines: limited amount of sawdust from pellet breakdown to avoid dust while loading and problems with pellet flow during operation (amount of fines passing through 1/8″ screen no more than .5% by weight)”
Chlorides: limited salt content (no more than 300 parts per million) to avoid stove or vent rusting
Ash content: important factor in maintenance frequency.
Differences between premium and standard grade fuel
All of the measurable characteristics defined by PFI standards are the same for both fuel grades except ash content. Standard grade pellet fuel (up to 3% ash content) is usually derived from materials which result in more residual ash, such as sawdust containing tree bark (which contains more impurities) or agricultural residues like nut hulls. Standard pellets should only be used in stoves designated for their use.
Premium grade pellet fuel (less than 1% ash content) is usually produced from hardwood or softwood sawdust containing no tree bark. Ash content varies in premium fuels from about 0.3% in some western softwoods to about 0.7% in eastern hardwoods. Premium pellets, which make up over 95% of current pellet production, can generally be burned in stoves calling for either standard or premium fuel. Increased availability of standard fuel is anticipated as stove designs continue to improve ash tolerance.
Ash content determines fuel grade because of its role in maintenance frequency. It is the prime factor that determines maintenance frequency of ash removal from the appliance and venting system. In early pellet stove designs, fuel compatibility was the critical factor that determined whether a stove worked well or not. Fuel grade and specific ash content within a fuel grade are still to be considered, but advances in pellet stove technology are making fuel choice wider and easier. The size of the ash drawer, fuel feed and grate design, proper venting, correct operation and maintenance all play a part in maintenance frequency. The experienced pellet stove professional is the best source of information about stove and fuel compatibility.
There are a number of variations in pellet fuels that are not included in PFI standards. For example, Btu (heat) content may range from just under 8,000 to almost 9,000 Btu, depending upon species and region of the country.
Other characteristics like trace minerals in pellet raw materials vary not only from region to region, but even in close by growing areas. Some trace minerals promote clinkering, the formation of clumps of fused ash that can block air inlets in the burn pot. A fuel’s tendency to form clinkers in a stove cannot be predicted by laboratory analysis both because of variations in the raw materials and the different burning conditions that affect the process. Clinkering can increase routine maintenance, but professional recommendations for matching available fuels to stove design can minimize the problem. Pellet mills strive for consistency despite the nature of the raw material. Slight variations in fuel even from bag to bag are inevitable, but the differences are usually insignificant and much smaller than found in the original raw material before processing. Pellets consistently deliver enjoyable, predictable comfort when burned in well designed, operated, and maintained stoves.

Cost

In the US, pellets are sold by the bag (40 lb), by the ton (50 bags), and by the skid (60 bags). The selling price currently ranges from $120 to $200 per ton ($2.40 to $4.00 per bag) and averages $150 per ton ($3.00 per bag). Price varies by region, availability, and season, just like other heating fuels.
Because bags of pellets stack and store easily, many prudent customers take advantage of lower off season prices and ensure their winter fuel supply by buying early. Selling price, of course, is only a part of the cost picture. The primary issue is the cost of energy, which is measured in dollars per million British thermal units. Pellets purchased at the average $150 per ton and burned in a typical pellet stove cost about $11.50 per million Btu, a figure that is less than the cost of electric heat and competitive with average energy costs of some other fuels. The actual cost of heating a home must take into account the insulation and tightness of the home, its size and layout, the level of comfort desired, and local climate. Other economic factors impacting energy costs, though hard to quantify, are also worth consideration. Biomass pellets reduce the use of dwindling fossil fuels, often imported from foreign countries. Every ton of waste material used in pellets reduces the rising costs associated with waste disposal.
The average pellet stove user will consume at the rate of about one 40 lb bag of wood pellets every 24 hours for every 1,500 square feet being heated. Pellet consumption varies depending on overall home efficiency and stove settings.

Advantages
The first appeal of pellets is their convenience. Bags of pellets stack compactly and store easily. A ton of pellets can be stacked in an area as small as four feet wide, long, and high, an area about half the space needed for a cord of wood. Bags of pellets can be stored in a small area of a dry garage, basement, or utility room or shed.
Pellets are also convenient because they load easily and cleanly into the stove hopper. Loading the hopper is normally required only once a day and may be even less frequent when the stove is used on low settings. The small size of pellets allows for precisely regulated fuel feed. In turn, combustion air can be regulated easily for optimum burn efficiency since the amount of fuel in the burn pot is predictable and consistent. High combustion efficiency is also due to the uniformly low moisture content of pellets (consistently below 10% compared to 20 to 60% moisture content in cordwood). Uniformly low moisture, controlled fuel batches, and precisely regulated combustion air means high heat output and a very low level of unwanted emmissions .
Other environmental benefits besides clean burns result from the use of pellet fuels. As a biomass fuel, pellets offer the advantages of sustainable energy supplies through renewable raw materials. In addition, pellets are a by-product, not a primary user, of these renewable materials. Using pellets also helps reduce the costs and problems of waste disposal. In 1993-94, more than 6.5 million cubic yards of waste were diverted from landfills and converted to home heating in the form of pellets. As part of the tradition of the hearth, pellet burning offers the enjoyment of fire viewing and active participation in providing winter comfort in the home.

Pellet fuel glossary

ash: Pellet stoves produce two kinds of ash:1) solid ash residue in the firepot; and
2) fly ash (unburnt particles) that becomes air born (sparklers) during the combustion process. Pellet stove designs vary and have different methods of disposal. Most ash accumulates in an ash compartment and the size of the compartment and disposal method determines the convenience of disposal. Some ash accumulates in “ash traps” which need to be cleaned periodically. The remaining ash (fly ash) accumulates in, or is blown out of the venting.

fines: Fines (sawdust) are caused by pellet disintegration at the mill or in subsequent handling. They cause two potential problems: dust in the home when the hopper is filled and possible interference to the flow of pellets as the pellets are transported to the burn system.
size: Usually no problem except that smaller pellets usually feed more pounds per hour on the same stove setting, which could affect the balance of air-to-fuel. Long pellets might cause “bridging” (starving the fuel delivery system).
Btu’s (heat) per pound: The variance of Btu’s per pound is usually not noticeable to most users. Overall efficiency (combustion efficiency × heat transfer efficiency) has a much greater effect on heat delivered to the home.
density: The density (measured in pounds per cubic foot) determines the potential energy delivered to the stove. Low density fuels, however, may cause the fire to go out on very low burn settings without the proper air-to-fuel ratio.
salt: Salt in pellets can cause stove deterioration (rust). Pellet Fuels Institute is participating in tests to determine the effects of salt and the most accurate methods of measurement. The results will be reflected in the sodium portion of the pellet fuel standards.
clinkers: Clinkers are the result of impurities in the wood before it is pelletized. Clinkers may also occur due to ash fusion (ash melted together in the burnpot), and can sometimes be reduced by changing the air-to-fuel ratio.
dirty glass: Caused by faulty combustion and/or ash, however, the efficiency of the stove’s air wash system is the primary factor. Some pellet wood creates a film on the glass to which ash adheres, making a clean glass more difficult.

Alternative in the wood industry

The prices of fossil fuels increase globally, causing other techniques and sources to be looked at for an alternative. More and more pellet heaters are installed. Compared to the price spikes in fossil fuels, wood pellets are relatively cheap to produce and transform. Since the industry-wide adoption in 1999 the demand for wood pellets is evergrowing. Especially in Europe wood pellets and the energy extraction is becoming a sizable industry for the years to come.

Wood pellet prices are generally the lowest in April when mills are gearing up for their spring production. This year only one pellet mill is dropping their pricing. All the remaining mills are keeping their current pricing or going up, and it’s only March. Three companies have implied that they are having issues with obtaining raw materials and the only mill to drop its pricing is now allocating product to its dealers.

Ferestien Feed carries one of the largest supplies of wood pellets in the Greater Boston area ready for delivery.

Wood Pellets DELIVERED from $260. We offer delivery service through most of:

* Eastern Massachusetts

* South Shore & Cape Cod

* Most of RI

* Northern & Eastern CT

* Other areas available for 8+ ton loads

These areas include for wood pellet delivery but are not limited to:

* Worcester and surrounding towns

* Leominster, Fitchburg, Gardner, Ayer and surrounding towns

* Acton, Billerica, Reading and surrounding towns

* Marlboro, Northborough, Sudbury, Concord and surrounding towns

* Hopkinton, Holliston, Millis, Medfield and surrounding towns

* Milford, Franklin Foxboro, Stoughton and surrounding towns

* Oxford, Millbury, Northbridge, Mendon, Uxbridge and surrounding towns

* Webster, Douglas and surrounding towns

* Attleboro, Taunton, Middleboro and surrounding towns

* Southbridge, Sturbridge and surrounding towns

* Spencer, Brookfields and surrounding towns

* Woodstock, Ashford, Brooklyn, Central Village and surrounding towns

* Thompson, Putnam and surrounding towns

* Harrisville, Providence, Warwick, Kingston and surrounding towns

Delivery charges range from $10 to $150 depending on delivery area